2. Getting Started/Basic Operations
60
¢ Function button settings at the time of purchase.
• Exit the menu after it is set.
∫ Using function buttons with touch operations
[Fn2], [Fn3], [Fn4], [Fn5] and [Fn6] are used by touching function buttons.
1 Touch [ ].
2 Touch [Fn2], [Fn3], [Fn4], [Fn5] or [Fn6].
•
The assigned function will operate.
• Some functions cannot be used depending on the mode or displayed screen.
• When using [Ex. Tele Conv.] (still pictures), check that [Picture Size] is set to [M] or [S].
• Operations of the cursor button, [MENU/SET], and the control dial are disabled when [Cursor
Button Lock] is set. Press the function button again to enable them.
• When [Restore to Default] is set, function button settings return to the default configuration.
Not available in these cases:
•
The function buttons are not available in Self Shot Mode.
• In the following case, [Fn1] does not work:
– [Miniature Effect]/[One Point Color]/[Sunshine] (Creative Control Mode)
– When using [Multi Exp.]
– When using [Time Lapse Shot]
[Custom] menu
– [Silent Mode] (P181)
– [Peaking] (P153)
– [Histogram] (P44): [Fn4]
¢
– [Guide Line] (P44)
– [Zebra Pattern] (P188)
– [Monochrome Live View] (P189)
– [Rec Area] (P206)
– [Step Zoom] (P196)
– [Zoom Speed] (P196)
– [Touch Screen] (P49)
To Next Page
Loading...
