25
Recording
(ENG) VQT5D62
∫ Combining pictures into a single picture with rich gradation ([iHDR])
When [iHDR] is set to [ON] and there is, for example, strong contrast between the
background and the subject, multiple still pictures are recorded with differing exposures
and combined to create a single still picture rich in gradation.
[iHDR] works automatically as needed. When it does, [ ] is displayed on the screen.
∫ Taking a picture with a blurred background (Defocus Control)
You can easily set the blurriness of the background while checking the screen.
1 Press 3 to display the setting screen.
•
Each time 3 is pressed in Intelligent Auto Plus Mode, the camera switches between
brightness setting operation, Defocus Control operation, and normal operation.
• Each time 3 is pressed in Intelligent Auto Mode, the camera switches between Defocus
Control operation and normal operation.
2 Rotate the control dial to set the blurriness.
Recording Mode:
This mode enables you to change the brightness and colour tone to your preferred
settings from the ones set by the camera.
∫ Setting brightness
1 Press 3 to display the setting screen.
•
Each press of 3 switches among brightness setting, Defocus Control and end operation.
2 Rotate the control dial to adjust brightness.
∫ Setting colour
1 Press 1 to display the setting screen.
2 Rotate the control dial to adjust colour.
•
This will adjust the colour of the image from a reddish
colour to a bluish colour.
• Press [MENU/SET] to return to the recording screen.
[MENU] > [Rec] > [iHDR] > [ON]/[OFF]
Recording images by changing the brightness or colour tone
SSSSSS
FF
250500
4.0 5.6 8.0
3060125
±0±0
+1+1 +2+2 +3+3 +4+4 +5+5
-
5
-
5
-
4
-
4
-
3
-
3
-
2
-
2
-
1
-
100
DMC-GM1KGH-VQT5D62_eng.book 25 ページ ２０１３年１０月１８日 金曜日 午後４時７分
To Next Page
Loading...
Need help?
General
