24
Recording
VQT5D62 (ENG)
Taking Pictures using the Automatic Function
(Intelligent Auto Mode)
Recording Mode:
In this mode, the camera makes the optimal settings for the subject and scene, so we
recommend it when you wish to leave the settings to the camera and record without
thinking about them.
1
Set the mode dial to [¦].
• The camera will switch to either the most recently used
of Intelligent Auto Mode or Intelligent Auto Plus Mode.
At the time of purchase, the mode is set to Intelligent
Auto Plus Mode. (P24)
2
Align the screen with the subject.
• When the camera identifies the optimum scene, the icon
of the scene concerned is displayed in blue for 2 seconds,
after which its colour changes to the usual red. (Automatic
scene detection)
• When the subject is touched, AF Tracking function works.
It is also possible by pressing the cursor button towards 2, and then pressing the
shutter button halfway.
∫ Switching between Intelligent Auto Plus Mode and Intelligent Auto Mode
1 Press [MENU/SET].
2 Press 2.
3 Press 3/4 to select the [ ] or [ ] tab.
4 Press 2/1 to select [ ] or [ ] and then press
[MENU/SET].
•
If [DISP.] is pressed, the description of the selected mode
will be displayed.
∫ Recording night scenes ([iHandheld Night Shot])
When [iHandheld Night Shot] is set to [ON] and [ ] is
detected while taking handheld night shots, pictures of the night scenery will be taken at a
high burst speed and composed into a single picture.
[MENU] > [Rec] > [iHandheld Night Shot] > [ON]/[OFF]
DMC-GM1KGH-VQT5D62_eng.book 24 ページ ２０１３年１０月１８日 金曜日 午後４時７分
To Next Page
Loading...
Need help?
General
