61
Others
(ENG) SQT0775
• When the ambient temperature is high or recording with [ ] ([4K Burst]) or [ ]
([4K Burst(S/S)]) of the 4K Photo function is performed continuously, the camera may display
[ ] and stop the recording to protect itself. Wait until the camera cools down.
• You may not be able to record for a short while after turning this unit on when using a large
capacity card.
• When the ambient temperature is high or motion picture is recorded continuously, the camera
may display [ ] and stop the recording to protect itself. Wait until the camera cools down.
• Depending on the environment at the time of motion picture recording, the screen may be
blacked out momentarily or the unit may record noise due to static electricity or powerful
electromagnetic waves (radio towers, high voltage power lines, etc.).
• This phenomenon occurs when the camera is trying to record with highly accurate focus at a
reduced Auto Focus speed, and is not a malfunction.
• When the electronic shutter is used, the flash is not activated.
> Set [Electronic Shutter] to [OFF].
• When [Silent Mode] is set to [ON], the flash is not activated.
> Set [Silent Mode] to [OFF].
4K photo recording stops before finishing.
Recording motion pictures is not possible.
Motion picture recording stops in the middle.
The screen may be blacked out momentarily, or the unit may record noise.
Sometimes it is difficult to focus with Auto Focus when recording 4K motion
pictures.
The flash is not activated.
DMC-GX8_PP-SQT0775_eng.book 61 ページ 2015年7月7日 火曜日 午後5時1分