EasyManuals Logo

Panasonic Lumix DMC-LS1 User Manual

Panasonic Lumix DMC-LS1
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Preparation
14
VQT0Q58
Unusable batteries
Operations by using the batteries listed
above are not guaranteed. If the batteries
listed above are used, leakages can result
and the following malfunctions can occur;
Remaining battery power may not be
displayed accurately.
The camera may not be turned on.
Data written to the built-in memory or
the card can be damaged resulting in
the loss of photos.
Shapes of batteries that cannot be
used
Batteries with unusual shapes cause
leakage, generation of heat or explosion if
they are inserted in the camera.
Some commercial batteries have partially
or entirely peeled outer coverings. Never
use these batteries. (Refer to the
illustration below.)
Battery indication
The remaining battery power appears on
the screen. [It does not appear when you
use the camera along with the AC adaptor
(DMW-AC1; optional).]
The battery indication turns red and
blinks. (If the LCD monitor is turned off,
the status indicator blinks.)
Replace with new batteries or fully
charged Ni-MH batteries.
Proper Care and Handling of the
Batteries
If you mishandle the batteries, leakage,
generation of heat and fire or explosion
may occur. Observe the following cautions;
Do not subject the batteries or the battery
contacts to any moisture.
Do not peel off or scratch the covered
seal.
Do not drop, hit or do anything that causes
impact to the batteries.
Do not use batteries that show signs of
leakage, deformation, discoloration or
other defects.
Do not store batteries in high humidity or
high temperature environments.
Keep batteries away from children.
When you replace batteries, always use
two of the same type.
If you will not be using the camera for a
long time, remove the batteries.
Batteries may become warm soon after
you use the camera. To remove the
batteries, turn the camera off and then
wait until the battery temperature
becomes lower.
Manganese
batteries
Lithium batteries
Nickel batteries Ni-Cd batteries
All or part of the
seal of batteries
are peeled off
- polarity is flat
VQT0Q58ENG.book 14 ペー 005年2月3日 木曜日 午後7時0

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic Lumix DMC-LS1 and is the answer not in the manual?

Panasonic Lumix DMC-LS1 Specifications

General IconGeneral
BrandPanasonic
ModelLumix DMC-LS1
CategoryDigital Camera
LanguageEnglish

Related product manuals