Playback (advanced)
80
VQT0Q58
• If you copy the data from the built-in
memory to the card, we recommend using
a card which has more free space than
the built-in memory (about 14 MB).
• If a picture having the same name as the
name of picture to be copied exists in the
copy destination, the picture will not be
copied.
• When you copy the data from the built-in
memory to the card and if the free space
on the destination recording medium is
not sufficient, the picture data can only be
copied halfway.
• DPOF settings on the original picture data
will not be copied. Set DPOF settings
again after the copy is completed. (P72)
• Only files conforming to DCF standard
(P49, 74) can be copied. (Files which do
not conform to DCF standard cannot be
copied.)
• It may take time to copy the data.
• Pictures which are recorded or edited with
other equipment may not be copied.
1 Select [YES] to format the
medium.
(The illustration is the screen when the
built-in memory is formatted.)
• When a card is not inserted, you can
format the built-in memory. When a
card is inserted, you can format the
card.
Initializing the Built-in Memory/
the Card
[FORMAT]
DELETE ALL DATA
ON THE BUILT-IN MEMORY?
SELECT
SET
YES
NO
FORMAT
VQT0Q58ENG.book 80 ページ ２００５年２月３日 木曜日 午後７時０分
To Next Page
Loading...
Need help?
General
