Playback (advanced)
82
VQT0Q58
Playing Back Pictures on a TV Screen
∫ Playing back pictures with video
cable (supplied)
• Turn the camera and the TV off.
1 Connect the video cable A
(supplied) to the [V.OUT] socket
of the camera.
• Connect the video cable with the [ ]
mark facing the [1] mark on the
[V.OUT] socket.
• Hold the plug B to push into or pull out.
2 Connect the video cable to the
video input socket of the TV.
• 1 Yellow: to the video input socket
3 Turn the TV on and select external
input.
4 Turn the camera on and then set
the mode dial to playback mode
[].
∫ Viewing pictures in other countries
When setting [VIDEO OUT] on the
[SETUP] menu, you can view images on
the TV in other countries (regions) which
use the NTSC or PAL system.
• Even if you set menu selection for
[VIDEO OUT] to [PAL], the output signal is
still NTSC in the recording mode.
∫ Playback pictures on TV with SD
Memory Card slot
A recorded SD Memory Card can be
played back on TVs with an SD Memory
Card slot.
If you play back pictures recorded using
[HDTV] mode on a High-Definition TV,
(HDTV has 16:9 aspect) the picture quality
will be better.
(MultiMediaCard may not be played back
on TV with SD Memory Card slot.)
• Do not use any other video cables except
the supplied one.
• Read the TV operating instructions too.
DIGITAL
V.OUT
DC IN
3V
VQT0Q58ENG.book 82 ページ ２００５年２月３日 木曜日 午後７時０分
To Next Page
Loading...
Need help?
General
