Recording pictures (basic)
44
VQT0Q58
Compensating the Exposure
Use this function when you cannot achieve
appropriate exposure due to the difference
of brightness between the subject and the
background.
Under exposed
Compensate the exposure toward positive.
Properly exposed
Over exposed
Compensate the exposure toward negative.
1 Press 3 several times until
[ EXPOSURE] appears and
then compensate the exposure.
• You can compensate from j2EV to
i2 EV in steps of 1/3 EV.
• EV is an abbreviation of Exposure Value,
and it is the amount of light given to the
CCD by the aperture value and the shutter
speed.
• The compensation range of the exposure
will be limited depending on the
brightness of the subject.
• The exposure compensation value
appears on the lower left of the screen.
• The set exposure value is memorized
even if the camera is turned off.
SCN1
SCN
2
EXPOSURE
SELECT
EXIT
VQT0Q58ENG.book 44 ページ ２００５年２月３日 木曜日 午後７時０分
To Next Page
Loading...
Need help?
General
