Recording pictures (basic)
37
VQT0Q58
∫ The Backlight Compensation
Backlight is a situation where light comes
from the back of subjects. The subjects
such as people become dark when pictures
are recorded in backlight. If you press 3,
[ ] (compensating backlight ON
indication) appears and the backlight
compensation function is activated. This
function compensates the backlight by
brightening the whole of the picture.
• If you press 3 while [ ] is displayed,
[ ] disappears and the backlight
compensation function is canceled.
• When you use the backlight compensation
function, we recommend using the flash.
• The settings on [BATTERY TYPE],
[BEEP] and [CLOCK SET] in the simple
mode are also applied to other recording
modes.
• You cannot set the following items in the
simple mode.
– [NO.RESET]
–[RESET]
– [USB MODE]
– [VIDEO OUT]
–[LANGUAGE]
However, the setting on [NO.RESET] and
[LANGUAGE] in the [SETUP] menu also
affects the simple mode.
• You cannot use the following functions in
the simple mode.
– White balance fine adjustment
– Exposure compensation
– Auto bracket
– [PICT.SIZE]
– [QUALITY]
– [D.ZOOM]
– [COL.EFFECT]
– [PICT.ADJ.]
However, the setting on [PICT.SIZE] and
[QUALITY] corresponds to the setting on
[PICT.MODE].
BACKLIGHT
BACKLIGHT
5
5
VQT0Q58ENG.book 37 ページ ２００５年２月３日 木曜日 午後７時０分
To Next Page
Loading...
Need help?
General
