82
SQW0038
Recording mode
Taking pictures after setting the aperture value and shutter speed
About Programme Shift
The function for maintaining the same exposure (brightness) while changing the shutter
speed and aperture value combination is called “Programme Shift”. You can use
“Programme Shift” to take pictures by adjusting the shutter speed and aperture value
even in [Program AE] Mode.
<Example of Programme Shift>
1.4
2.0
2.8
4.0
5.6
8.0
11
16
22
1 2 3 4 5 6 7 8 9 10 11 12 1613 14 15
1
1/2
1/4
1/8
1/15
1/30
1/60
1/125
1/250
1/500
1/1000
1/2000
1/4000
1/8000
1/16000
17
18
19
20
21
22
23
24
25
(Aperture value)
(EV)
(Shutter speed)
Programme Shift amount
Programme Shift diagram
Programme Shift limit
●
EV is an abbreviation of “Exposure Value”, a unit indicating the amount of exposure. The EV
changes with the aperture value or the shutter speed.
Not available in the following cases:
●
Programme Shift cannot be used in the following cases:
• During motion picture recording
• When [Sensitivity] is set to [
]
To Next Page
Loading...
