Application (Record)
Using the level gauge
- 128 - VQT4J31
If you want to make sure that the camera is not slanted or tilted, for example, when you
take a picture of a landscape, use the level gauge indication as a reference.
Press [DISP.] button to switch the
display
Press the button to switch the display. Press
the button until the level gauge is displayed.
Correct camera angle
■
Using the level gauge
The yellow line indicates the current angle (horizontal line). Correct the angle of the
camera so that it matches the white line.
Tilting up or down
• In this case, it is facing
upward.
Tilting left or right
• In this case, the right side has
dropped.
• When the camera’s angle is minimal, the level gauge will turn green.
• When pictures are taken in portrait orientation, the level gauge is automatically
switched to one for portrait orientation.
●
Even when angle is more or less corrected, there may be an error of about ±1 degree.
●
Every time you press when [Fn Button Set] of the [Setup] menu is set to [Level
Gauge], you can turn the level gauge indication on and off.
●
When the camera is being moved, the level gauge may not be displayed correctly.
●
The level gauge may not be displayed correctly or the direction detect function may
not operate correctly if the pictures are taken with the camera pointing sharply up or
down.
To Next Page
Loading...
Need help?
General
