Application (Record)
Using the [Rec] menu
- 148 - VQT4J31
●
Pictures taken using interval recording cannot be stored in the built-in memory.
●
The interval recording function is not intended for application-specific systems
(monitoring cameras).
●
If you leave the camera unattended during interval recording, make sure that the
camera is not stolen.
●
Exercise caution when you perform interval recording for a long period of time in cold
regions or in a low-temperature or high-temperature/high-humidity environment, since
such use could cause malfunctions.
●
There is a possibility of the camera moving when it automatically turns on or off, for
example, when the lens is retracting into the camera housing. We recommend fixing
the camera to a tripod or using other methods on a stable surface when you take
pictures using interval recording. Make sure that the camera does not topple over
because of wind or other causes.
●
This function cannot be used for recording motion pictures.
●
Use a fully charged battery.
●
Interval recording will be interrupted and the setting will be cancelled in the following
cases.
• When the remaining battery power runs out
• When the maximum number of pictures that can be recorded has been reached
●
Do not connect the AV cable (optional), HDMI mini cable (optional), and USB
connection cable during interval recording.
To Next Page
Need help?
General
