Application (Record)
Recording motion pictures
- 83 - VQT4J31
●
You can record motion pictures to the built-in memory only in [VGA] mode. (→150)
●
Use a sufficiently charged battery.
●
The available recording time displayed on the screen may not decrease regularly.
●
[Sensitivity] is set automatically while a motion picture is being recorded. Also [ISO
Limit Set] is disabled.
●
The following functions are not available:
Extra optical zoom, flash, [Face Recog.], [Rotate Disp.] for pictures taken vertically.
●
For certain memory cards, recording may end while in progress.
●
The recording range may become narrower in motion pictures compared to still
pictures. Also, if the aspect ratio is different for still pictures and motion pictures, the
angle of view will change when starting to record a motion picture. The recordable
area is displayed by setting [Video Rec Area] (→34) to [ON].
●
If Extra optical zoom is used before pressing the motion picture button, these settings
will be cleared, and the recordable area will be changed significantly.
To Next Page
Loading...
Need help?
General
