- 57 -
Using the [Rec] menu
[White Balance]
• For [Rec] menu setting procedures (→33)
Adjust colouring to suit light source if colours otherwise appear unnatural.
■
Recording mode:
■
Settings: [AWB] (automatic) / (outdoor, clear sky) / (outdoor, cloudy sky) /
(outdoor, shade) / (incandescent lighting) /
(uses value set in ) / (set manually)
[AWB] operational range:
10000K
9000K
8000K
7000K
6000K
5000K
4000K
3000K
2000K
Cloudy sky (rain)
Shade
Incandescent lighting
Sunset/sunrise
Candlelight
Sunlight
White fluorescent lighting
Blue sky
K=Kelvin colours Temperature
■
Setting White Balance manually ( )
Select and press [MENU/SET].
Point the camera towards a white object (e.g. paper)
and press [MENU/SET].
• White Balance is set to .
• The White Balance you set is retained even after
the power is turned off.
• White Balance setting may not be possible if the
subject is too bright or too dark. In such cases,
adjust the subject to an appropriate brightness, and
then set the White Balance again.
Only takes picture of white
objects within frame (step
)
●
A picture may appear reddish or bluish when the White Balance is outside the [AWB]
operational range. Even if the White Balance is within the [AWB] operational range, this
function may not work correctly if there are multiple light sources.
●
Under fluorescent lighting, LED lighting fixture etc., the appropriate White Balance will
vary depending on the lighting type, so use [AWB] or [ ].
●
White Balance setting is fixed to [AWB] in the following Scene Modes:
[Scenery], [Night Portrait], [Night Scenery], [Food], and [Sunset]
●
If the Scene Mode is changed, the white balance setting returns automatically to [AWB].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
