Connecting to other equipment
- 154 -
Connecting to other equipment
Saving the recorded still pictures and motion
pictures
Method to acquire into other equipment is different for the still pictures and motion pictures
recorded with this unit depending on their file format (JPEG, AVCHD Lite or
MOTION JPEG). Select the following methods depending on the equipment to be used.
File formats that can be used: [AVCHD Lite], [MOTION JPEG]
Copy images played back with this unit to DVD disc, hard disk, or video using a DVD
recorder, or video.
This can be played back with equipment that is not compatible with high definition
(AVCHD), so it is convenient for distributing copies. Image will be standard quality instead
of high definition at this time.
1 Connect this unit with the recording equipment with an AV cable (supplied)
2 Start the playback of this unit
3 Start the recording on the recording equipment
•
When ending the recording (copying), stop the playback on this unit after stopping the
recording in recording equipment.
Note
•
When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV ASPECT] (P34)
on this unit to [4:3] before starting a copy. The image will be vertically long if you play back
motion pictures copied with [16:9] setting on a [4:3] aspect TV.
• Do not use any other AV cables except the supplied one.
• It is recommended to turn off the display of the screen by pressing the [DISPLAY] on the
camera while copying. (P54)
• See the instruction manual for the recording equipment about the details of copying and playing
back.
Copy the playback image using an AV cable
1 Yellow: to the video input socket
2 White: to the audio input socket
3 Red: to the audio input socket
A
AV cable (supplied)
To Next Page
Loading...
Need help?
General
