- 31 -
Preparation
• The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear differently from actuality on the LCD monitor. However, this does not affect the
recorded pictures.
• The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD mode. Press any button to make the LCD monitor bright again.
• If the screen is difficult to see because of sunlight etc. shining on it, use your hand or another
object to block the light.
• The number of recordable pictures decreases in Auto Power LCD mode and Power LCD mode.
• [AUTO POWER LCD] cannot be selected in playback mode.
• The [PATTERN] setting is fixed to [ ] in the Intelligent auto mode and the clipboard mode.
[LCD MODE]
These menu settings make it easier to see the LCD monitor when
you are in bright places.
[OFF]
„ [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
… [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
[DISPLAY SIZE]
Change the display size of some icons and menu screens.
[STANDARD]/[LARGE]
[GUIDE LINE]
Set the pattern of the guide lines displayed when taking pictures.
You can also set whether or not to have the recording information
displayed when the guide lines are displayed. (P54)
[REC. INFO.]:
[OFF]/[ON]
[PATTERN]:
[]/[]
[HISTOGRAM]
This allows you to set either to display or not display the
histogram. (P55)
[OFF]/[ON]
LCD
To Next Page
Loading...
Need help?
General
