Panasonic Lumix DMC-TS1 User Manual

- 83 -
Advanced (Recording pictures)
Note
•
The screen will change as following when the motion picture button is pressed in steps 2 and
3.
¢1 The screen that is displayed during motion picture mode setting is different depending on the
setting of the
[REC MODE].
• It is possible to set from following [MOTION PICTURE] mode menu.
– [REC MODE] (P85)/[REC QUALITY] (P85)/[WHITE BALANCE] (P104)/[I.EXPOSURE]
(P111)/[AF MODE]
¢2
(P107)/[CONTINUOUS AF] (P88)/[DIGITAL ZOOM] (P113)/
[COLOR MODE]
¢2
(P113)/[WIND CUT] (P89)/[LED LIGHT] (P90)
¢2 The setting which can be selected are different from still picture [REC] mode menu.
• The flash setting is fixed to [Œ].
• Refer to P192 for information about the available recording time.
• The available recording time displayed on the screen may not decrease regularly.
• Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
• When motion pictures recorded with the camera are played back on other equipment, the
quality of the picture and sound may deteriorate and it may not be possible to play them back.
Also the recording information may not be displayed correctly.
• Operational sound of the unit, which may be caused by operation or zooming, might be
recorded.
• Noise may be recorded underwater.
• When operating the zoom in recording motion pictures, it may take time to come into focus.
• If the Extra optical zoom was used before pressing the motion picture button, recordable area
will be changed drastically since these settings are cancelled.
• Sound from motion pictures (When [REC MODE] is set to [MOTION JPEG]) or pictures
with audio recorded by this camera cannot be played back by older models of
Panasonic digital camera (LUMIX) launched before July 2008.
• In recording motion pictures, [STABILIZER] is fixed to [MODE1].
• In recording motion pictures, the following functions cannot be used.
– Direction detection function
– [NATURAL] and [VIVID] in [COLOR MODE]
– Extra optical zoom (EZ)
– [FACE RECOG.]
• This unit does not support recording motion pictures on MultiMediaCards.
• Angle of view may be narrower in the motion picture compared with the still picture.
• Field of view during the recording of motion picture is displayed when [ REC AREA] (P32) is
set to [ON].
A Still picture recording
screen
B Motion picture mode
setting
¢1
C Motion picture
recording screen
D Still picture mode
setting
AUTO
AUTO
AUTO
6
6
3 s
3 s
R1ｍ
R1ｍ
24
24 s
R1ｍ 24 s

Panasonic Lumix DMC-TS1 Specifications

General

Brand	Panasonic
Model	Lumix DMC-TS1
Category	Digital Camera
Language	English