- 37 -
Preparation
• The [PATTERN] setting is fixed to [ ] in the Intelligent Auto Mode and the Clipboard Mode.
• Motion picture recording frame display is only an approximation.
• Recording frame display may disappear when zooming to Tele depending on the picture size
setting.
• This cannot be used during Intelligent Auto Mode.
• [AUTO POWER OFF] is set to [5MIN.] in the Intelligent Auto Mode and the Clipboard Mode.
• [AUTO POWER OFF] does not work in the following cases.
– When using the AC adaptor
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a Slide Show
– [AUTO DEMO]
• The effect of the [LCD POWER SAVE] is lower in the Digital Zoom range compared to the
Optical Zoom range.
• The effect of the [LCD POWER SAVE] will not affect the image being recorded.
• Setting of [LCD MODE] has priority over the setting of [LCD POWER SAVE] regarding the
brightness of the LCD monitor.
[GUIDE LINE]
Set the pattern of the guidelines displayed when taking pictures.
You can also set whether or not to have the recording information
displayed when the guidelines are displayed. (P60)
[REC. INFO.]:
[OFF]/[ON]
[PATTERN]:
[]/[]
[HISTOGRAM]
This allows you to set either to display or not display the
histogram. (P61)
[OFF]/[ON]
[ REC AREA]
Angle of view for motion picture recording can be checked.
[OFF]/[ON]
q [ECONOMY]
You can conserve the battery life by setting these menus.
Also, the battery life is conserved by dimming the LCD monitor.
[AUTO POWER OFF]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[LCD POWER SAVE]:
Brightness of the LCD monitor is lowered. The battery life will be
conserved by lowering the image quality of the LCD monitor
further during the recording
¢
.
¢ Excluding the Digital Zoom range.
[OFF]/[ON]
To Next Page
Loading...
Need help?
General
