- 43 -
Using the [Setup] menu
Item Settings, notes
[Volume]
Adjust volume of sound
from speakers (7 levels).
[0] / [1] / [2] / [3] / [4] / [5] / [6]
• Cannot be used to adjust TV speaker volume when
connected to TV.
[Cust.Set Mem.]
Register settings on
current camera. (→70)
(Recording Mode only)
[C1] / [C2-1] / [C2-2] / [C2-3]
[LCD Display]
Adjust brightness and
colour of the LCD
monitor.
Press to select the setting item and press to
make adjustments
Press [MENU/SET]
• Some subjects may look different from their actual
appearance, but the recorded picture will not be affected.
• Cannot be used to set brightness and contrast when
[High Angle] is selected under [LCD Mode].
[LCD Mode]
Make LCD monitor easier
to see.
[Auto Power LCD]:
The brightness is adjusted automatically depending on
how bright it is around the camera.
[Power LCD]:
Makes screen brighter than normal (for outdoor use).
[High Angle]:
Makes screen easier to see when taking pictures from
high positions (becomes harder to see from the front).
[OFF]
• Cannot select [Auto Power LCD] and [High Angle] in
playback mode.
• [Power LCD] returns to ordinary brightness if there is no
operation for 30 seconds when recording. (Press any
button to make the screen brighter again.)
• [High Angle] will be cancelled when power is turned off
(including [Sleep Mode]).
• Because the picture shown on the LCD monitor screen
emphasises brightness, some subjects may look different
than their actual appearance, but this will not affect the
recorded picture.
• Setting [LCD Mode] reduces the operating time.
• For details about the setting procedure in the [Setup] menu (→39)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
