12 VQT4B83 (ENG)
Charging the battery
• The battery is not charged when the camera is shipped. Charge
the battery before use.
• Charge the battery with the AC adaptor (supplied) indoors (10 °C
to 30 °C (50 °F to 86 °F)).
• Always use the dedicated AC adaptor (supplied), USB connection
cable (supplied), and battery.
• To charge the battery, insert it into the camera.
• Make sure that the camera is turned off.
Connect the AC adaptor ( ) (supplied) and the
camera using the USB connection cable ( )
(supplied), and plug the AC adaptor ( ) (supplied)
into the electrical outlet
To the electrical outlet
●
Do not use any other USB connection cables except the supplied one.
Doing so may cause malfunction of the camera.
●
Do not use any other AC adaptors except the supplied one.
■
Charging lamp ( )
On: Charging in progress (approx. 260 min. if fully depleted)
Off: Charging stops
■
About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BCG10E.
To Next Page
Loading...
Need help?
General
