Wi-Fi/NFC
Operating the camera using a smartphone/tablet
SQW0215
- 211 -
Adding location information to pictures in the camera
You can write the location information acquired on your smartphone to a picture recorded
in the camera on the same date/time using the Wi-Fi function.
GPS
Starts location information
recording
Ends location information
recording
Sends and writes the location
information
Start the recording
• Location information that is different from the information acquired during recording may
be written. Take care regarding the following matters.
– Set [Home] of [World Time] of the camera to your home area.
– Once a smartphone starts recording the location information, do not change the
[Home] setting of [World Time] of the camera.
• The location information cannot be written to pictures recorded without setting [Clock
Set].
■
Recording location information and taking pictures
Start recording the location information on your smartphone
Start “Image App”
Select [ ]
Select [ ]
Select [ Start geotagging]
Take pictures using the camera
End recording of the location information on your smartphone
Select [ Stop geotagging] to end recording of location information
(Continued on the next page)
To Next Page
Loading...
