Basics
Using the [Setup] menu
SQW0215
- 73 -
• For the setting procedures of the menu. (→61)
[USB Mode]
Select communication method for when connecting camera to a computer or printer with
USB connection cable (supplied).
■
Settings
[Select on connection]
Select communication method each time you connect to a computer
or PictBridge-compatible printer.
[PictBridge(PTP)]
Select when connecting to a PictBridge-compatible printer.
[PC]
Select when connecting to a computer.
[TV Connection]
Change the settings to be used when the camera is connected to a TV or other device.
●
[Video Out]
■
Settings
[NTSC] Video output is set to NTSC system.
[PAL] Video output is set to PAL system.
●
[TV Aspect]
This will work when the AV cable (optional) is connected.
■
Settings: [ ] / [ ]
●
[3D Playback]
Set how 3D still picture is output.
This will work when the HDMI micro cable is connected.
■
Settings: [3D] / [2D]
• If you want to play back a picture in 2D (conventional picture) on a 3D television, set
to [2D].
• For the procedure for playing back a 3D still picture. (→265)
To Next Page
Loading...
