114 VQT3G90 VQT3G90 115
Using the [Playback] menu (Continued)
Playback Mode:
For Playback menu display and operation methods (→38).
[Protect]
Set protection to disable picture deletion. Prevents deletion of important pictures.
Use cursor button to select [SINGLE] or [MULTI] and press
[MENU/SET]
Select picture
●
[SINGLE]
Use cursor button to select
picture and press [MENU/SET]
●
[MULTI]
Use cursor button to select picture and press
[MENU/SET]
Picture protected
Picture protected
• To cancel → Press [MENU/SET] again.
■
To clear all
Select [CANCEL] in step
and select [Yes].
■
To cancel while releasing all
Press [MENU/SET].
●
May not be effective when using other devices.
[Face Rec Edit]
Edit or delete the recognition information for pictures with mistaken Face Recognition.
Use cursor button to select [REPLACE] or [DELETE] and
press [MENU/SET]
Use cursor button to select the picture and press [MENU/SET]
Use cursor button to select a person and press [MENU/SET]
• If [DELETE], go to step .
• People whose Face Recognition information has not been registered cannot be
selected.
Use cursor button to select the person to replace for another
and press [MENU/SET]
Use cursor button to select [Yes] and press [MENU/SET]
●
When Face Recognition information is deleted, it cannot be restored.
●
Pictures for which all Face Recognition information has been deleted are not
categorized in Face Recognition during [Category Selection].
●
Recognition information cannot be edited in protected pictures.
[Copy]
You can copy pictures between built-in memory and memory card.
Use cursor button to select the copy method (direction) and
press [MENU/SET]
: Copy all pictures from built-in memory to card (go to step ).
: Copy 1 picture at a time from card to built-in memory.
Select picture with cursor button and press [MENU/SET]
Use cursor button to select [Yes] and press [MENU/SET]
• To cancel → Press [MENU/SET].
• After all the pictures are copied from the built-in memory to the memory card, the
display returns automatically to the playback screen.
●
Copying pictures may take several minutes. Do not turn off power or perform other
operations during copying.
●
If identical names (folder/file numbers) are present in the copy destination, a new
folder for copying will be created when copying from built-in memory to card ( ).
Identically-named files will not be copied from card to built-in memory ( ).
●
The following settings are not copied. Set them again after copying.
- [Print Set] - [Protect] - [Favorite]
●
Only pictures from Panasonic digital cameras (LUMIX) may be copied.
●
Motion pictures recorded in [AVCHD] format cannot be set.
To Next Page
Loading...
Need help?
General
