94 VQT3G90 VQT3G90 95
For [Rec] menu setting procedures (→38)
Using the [Rec] menu (Continued)
[Date Stamp]
Still pictures can be taken with the recording date and time stamped on the still picture.
■
Recording Mode:
■
Settings: [W/O TIME]/[WITH TIME]/[OFF]
●
Date stamps on still pictures cannot be erased.
●
The date cannot be stamped when [Auto Bracket] or [Burst] is set, in [3D Photo Mode],
when recording a motion picture, or when [Panorama Assist] or [Flash Burst] Scene
Mode is set.
●
Do not request date printing in store or make date printing on printer for still pictures
with date stamps. (Date printing may be overlapping.)
[Clock Set]
Set the clock. Same function as that in [Setup] menu.
[Red-Eye Removal]
Automatically detects red-eye and corrects still picture data when recording with flash
red-eye reduction (
).
■
Recording Mode:
■
Settings: [ON]/[OFF]
●
This setting will work only when [AF Mode] is (Face Detection).
●
Depending on the circumstance, it may not be possible to correct red-eye.
●
When the function setting is [ON], a appears with the flash icon.
[Stabilizer]
Automatically detects and prevents jitter.
■
Recording Mode:
■
Settings: [ON]/[OFF]
●
Setting fixed to [ON] during recording motion pictures, and in [Self Portrait] and
[Handheld Night Shot] Scene Modes.
●
In the [Starry Sky], [High Speed Movie] Scene Mode and [3D Photo Mode], the setting
is fixed to [OFF].
●
Cases where Optical Image Stabilizer may be ineffective:
Heavy jitter, high zoom ratio (also in the Digital Zoom range), fast-moving objects,
indoors or in dark locations (due to low shutter speed)
To Next Page
Loading...
Need help?
General
