Wi-Fi/NFC
Operating the camera using a smartphone/tablet
VQT5E94
- 201 -
Sending location information to the camera from a smartphone/tablet
You can acquire location information from a smartphone, and write it on images
afterwards. Refer to (→170) for how to write the location information on the images recorded
by this unit.
●
Caution:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the
subject when you use this function. Use at your own risk.
●
Read the [Help] in the “Image App” menu for further details on how to operate.
●
If you have changed the clock setting of this unit or the smartphone after [Time sync],
perform [Time sync] again.
●
On the smartphone, you can set the acquisition interval of location information and
check the transfer status of location information. Refer to [Help] in the “Image App”
menu for details.
●
(When using “Image App” for iOS)
If you press the Home or On/Off button of a smartphone while [Rec. loc. Info] is
working, location information recording is stopped.
●
The smartphone may fail to acquire location information in China and the border area
in the neighbouring countries of China. (Current as of January 2014)
To Next Page
Loading...
