Basics
Taking pictures with automatic settings [Intelligent Auto] Mode
VQT5E94
- 38 -
●
When you record motion pictures, the camera performs aperture control within the
appropriate exposure range, and the background defocusing may not change for
some subject brightness.
●
You can use [Intelligent Auto Plus] Mode to adjust brightness and colouring. (→41)
●
If the camera is turned off or the Recording Mode is changed, the background
defocusing setting returns to [AUTO].
[Motion Deblur]
[Motion Deblur] automatically sets the optimum shutter speed in accordance with the
movements of the subject to minimise the blur of the subject.
It is preset to [ON] with this unit.
■
Settings
Press [MENU/SET]
Press to select [Rec] menu and press [MENU/SET]
Press to select [Motion Deblur] and press [MENU/SET]
Press to select either [ON] or [OFF] and press [MENU/SET]
●
When [Motion Deblur] is set to [ON], [ ] appears on the screen.
●
The subject may be recorded in a picture size smaller than the number of pixels that
has been set.
To Next Page
Loading...
