Basics
Using the [Setup] menu
VQT5E94
- 72 -
• For the setting procedures of the menu. (→60)
[USB Mode]
Select communication method for when connecting camera to a computer or printer with
USB connection cable (supplied). Update the GPS assist data.
■
Settings
[Select on connection]
Select communication method each time you connect to a computer
or PictBridge-compatible printer.
[PictBridge(PTP)]
Select when connecting to a PictBridge-compatible printer.
[PC]
Select when connecting to a computer.
[GPS assist data]
Select when using this unit to update GPS assist data. (→266)
[TV Connection]
Change the settings to be used when the camera is connected to a TV or other device.
●
[Video Out]
■
Settings
[NTSC] Video output is set to NTSC system.
[PAL] Video output is set to PAL system.
●
[TV Aspect]
This setting performs when an AV cable (optional) is connected.
■
Settings: [ ] / [ ]
●
[3D Playback]
Set how 3D still picture is output.
■
Settings: [3D] / [2D]
●
If you want to play back a picture in 2D (conventional picture) on a 3D television,
set to [2D].
●
This item of the menu functions when an HDMI micro cable is connected.
●
For the procedure for playing back a 3D still picture. (→281)
To Next Page
Loading...
