Wi-Fi/NFC
Transferring pictures automatically [Smart Transfer]
VQT5E94
- 241 -
[Auto Transfer]
Automatically transfer pictures during charging.
Preparation: Set [Smart Transfer]. (→240)
Turn off the camera
(When using a power outlet)
Connect the AC adaptor (supplied) and the camera using the
USB connection cable (supplied), and plug the AC adaptor
(supplied) into the electrical outlet
(When using a PC)
Connect the camera to a computer using the USB connection
cable (supplied)
• [Smart Transfer] starts automatically according to the [Charge Priority] (→244)
setting.
• [Smart Transfer] is not available when the memory card is locked.
• Depending on the specifications of the PC, [Smart Transfer] may fail.
●
If there are pictures that are not transferred when [Auto Transfer] is set to [OFF],
the message that confirms whether to transfer these pictures is displayed. Select a
desired option.
To Next Page
Loading...
