Others
Digital Camera Accessory System
- 199 - VQT4J15
Using the Live View Finder (optional)
When the Live View Finder (DMW-LVF2: optional) is used, you can view the recording
screen even when taking pictures at a low camera angle, for example.
Preparation:
• Turn the camera ON/OFF switch to [OFF].
• Remove the hot shoe cover attached to the camera. (→9)
Firmly insert the Live View Finder into the hot shoe, as far as
it will go
Turn the camera ON/OFF switch to [ON]
Press the [LVF/LCD] button of the Live View Finder to switch
the display
• You can switch between the LCD (LCD monitor) display and LVF (Live View
Finder) display.
• The display selected by pressing the [LVF/LCD] button will be stored in memory
even when the camera ON/OFF switch is set to [OFF].
■
To automatically display the playback screen on the LCD monitor
When [Play on LCD] (→37) of the [Setup] menu is set to [ON], the LCD monitor will turn
on when the camera is switched from recording mode to playback mode. This operation
eliminates the time needed to switch between LCD monitor and Live View Finder when
recording pictures using Live View Finder.
●
Attach and detach the Live View Finder carefully and correctly.
●
The Live View Finder cannot be used together with an external flash.
●
When the shoulder strap is attached, make sure that the strap does not get snagged
on the Live View Finder.
●
Be sure to hold both the camera and the Live View Finder when the Live View Finder
is attached to the camera. If you hold only the Live View Finder, it could become
detached from the camera.
●
Refer to the operating instructions for the Live View Finder for further details.
To Next Page
Loading...
Need help?
General
