6.1.2.8. Removal of 2nd Lens Frame Unit
Screw(I) ×3
2-5 Cam Pin for 2nd Lens Frame Unit ×3
2nd Lens
Frame Unit
Cam Barrel
Unit
1. Remove 3 Screws (I)
2. Remove 3 pcs of 2-5 Cam Pin
3. Remove 2nd Lens Frame Unit
7mm
1. Remove 3 Screws(H)
2. Remove 1st Lens Frame Unit
3. Remove 3 1st Cam Pins
Screw(H)
1st Cam Pin
5.8mm
BLACK
Front
side
Rear
(body)
side
<Note>
- At this illustration,
the lens of front side is upward.
But it is easier to work with the rear side up.
1st Lens
Frame Unit
6.1.2.7. Removal of 1st Lens Frame Unit
*If only the 1st Lens Frame Unit is to be replaced, do not perform 3, and go to the 1
st
lens installation process.
To Next Page
Loading...
