Panasonic LX-900

Infrared
Remote
Controller
Battery Loading
Remove the Battery
Case Cover
by
pushing
it in the
direction of the arrow
as shown above and load
the
batteries with
their polarities
(+
and
-)
aligned correctly.
Notes for Battery
Use
•Do not
use rechargeable batteries
(i.e. nickel
cadmium—
NiCad batteries).
•
Do not mix
new
and
old batteries,
or different brands of
batteries
• Do not try
to recharge or
short-circuit the batteries
•Do not
break
batteries open, heat
them or incinerate
them
•Remove batteries
when this unit is
not in use for long
periods of time
•Should the battery
electrolytes leak, clean
and wipe the
Battery Case and
load new batteries
Battery
Life (When
to exchange
batteries)
Exchange the batteries
with new ones
about every
6
months However,
battery
life
depends on
the frequency
of
use
or
the selected
operation
mode
•Use ANSI
"AA' size batteries.
Remote
Controller
Operation
Notes
for Operation
•
Do not expose the
Remote Sensor
1o siroiig light
•Do not place
any obstacles
between the Remote
Controller and the
Remote Sensor,
•Do not use the Remote
Controller simultaneously
with
another electric
appliance's infrared
remote controller
Remote Sensor
(Remote
Control Receiver)
•
Point the Remote Controller
at the Remote Sensor
(Remote
Control Receiver) within about 7
m and within
about
30°
from the front
of the Player (The
operating
distance varies
with the room brightness
)
7