11
Bag Fastener
Buckle
Indicator for cleaning Cloth Dust Bag
VAC Gauge
Turn on the Vacuum Cleaner in maximum power condition and lift the nozzle off the
floor.
If the VAC Gauge turn red, the Cloth Dust Bag is full and required to clean the
Cloth Dust Bag.
If turn on the Vacuum Cleaner and adjust variable power control to minimum
condition, VAC Gauge may not turn red even the Cloth Dust bag is full.
Before replacing the Cloth Dust Bag, turn “OFF” the Supply Cord and disconnect
the Plug from the socket outlet.
Pull the Buckle to open the Dust Cover until standing
position.
Remove the Cloth Dust Bag from its catches.
• Pull out the Cloth Dust Bag.
Open the Bag Fastener and dispose the dust.
• Do not throw away the Bag Fastener.
HOW TO CLEAN YOUR CLOTH DUST BAG
Removing the Cloth Dust Bag / /
NOTE / /
•
•
How to operate
/
To Next Page
Loading...
