13
Floor Nozzle (check once a month)
• Fiber waste and hair trends to accumulate in nozzle can
reduces the suction power of Vacuum Cleaner.
• Inspect once a month.
Using an old toothbrush or similar tools, clean any dirt or
lint from the brush, roller and etc. Cut off any carpet pile
and lint entangled at the roller shaft with a pair of scissors.
■
When particulary dirty (nozzle only)
1. Wash with water and shake firmly about five times with
the ducts facing down to drain off the water.
2. Leave it sitting upside down for about 12 hours to dry.
MAINTENANCE
■
Before starting maintenance, switch off the power and disconnect the Plug from the socket outlet.
.
•
•
.
Main unit and accessories
• Wipe with a soft cloth that has been
moistened with water.
•
•
•
Never clean the unit using chemicals such as benzene, paint, thinner or alcohol. They will result in cracking and discoloration.
• Never dry the unit using hot air (from a hair dryer etc.). This will cause deformation.
• When using a chemically treated cloth to clean the unit, follow the instructions provided with the cloth.
.
NOTE / /
.
When required
/
To Next Page
Loading...
