Using Tools
ATTACHMENTS ON HANDLE
➢ If the Power Nozzle is attached, turn
vacuum cleaner off before removing
handle from wands.
➢ Press handle quick release, then
pull to remove handle from wand.
➢ Slide attachments firmly on handle
as needed (See page 30).
ATTACHMENTS ON WANDS
➢ If the Power Nozzle is attached, turn
vacuum cleaner off before removing
plug from wands.
➢ To remove wands from Power
Nozzle, lock wands in upright
position.
➢
Press wand quick release pedal with
foot and pull the wands straight up
out of Power Nozzle.
➢
Put attachments on wands as needed
(See page 30).
CAUTION
DO NOT attach or remove handle or
wands while vacuum cleaner is ON.
This could cause sparking and dam-
age the electrical contacts.
- 28 -