EN11
English
How to Use Dry Mill
This Dry Mill is designed for grinding dry ingredients such as coffee beans, dried pepper and spices.
Note:
• Working capacity: 50 g (coffee beans).
• Do not operate with an empty Dry Mill.
• Do not put liquid into the Mill Container.
• When removing the ingredients, be careful with the Mill Cutting Blade.
• Do not remove the Dry Mill from the Motor Housing until the rotation stops completely.
• Ensure that the Mill Cutting Blade stops completely before proceeding to the next P1 or P2 operation.
• Do not drop the appliance to avoid damaging it.
• It is prohibited to place following kinds of ingredients in the Mill Container: Meat, fi sh, hard ingredients (example:
turmeric, dried soya beans, frozen ingredients, Cassia cinnamon), very sticky ingredients (example: peanut butter),
oily ingredients (example: peanuts, walnuts), wet ingredients or any ice cubes.
• Remove the ingredients from the Mill Container and clean it immediately after blending.
Turn the Mill Container upside down and fi ll in the ingredients.
Place the Mill Container Base onto the Mill Container and turn it clockwise until a "click" sound is heard.
Place the Dry Mill onto the Motor Housing.
Turn the Dry Mill clockwise until a “click” sound is heard.
Plug into the rated power supply.
Maximum
Level for dry
ingredients
Turn on the Dry Mill by pressing the required speed.
• Support the Mill Container while in use to ensure that it is stable.
After blending, switch off by pressing the button.
Unplug.
P1 P22
1
ICE CRUSH
P1 P22
1
ICE CRUSH
Turn the Dry Mill anticlockwise and remove it from the Motor Housing.
Turn the Dry Mill upside down and turn the Mill Container Base anticlockwise to remove it from the Mill
Container.
Remove the ingredients.
Blender_MX-KM5080.indb 11Blender_MX-KM5080.indb 11 5/20/2020 3:47:16 PM5/20/2020 3:47:16 PM
To Next Page
Loading...
