Panasonic MX-KM5080

EN5
English
Parts Identifi cation
Note:
• Do not push the Safety Lock Pin and any Safety Levers with any instrument such as stick.
• Do not pour liquids or ingredients at the Safety Lock Pin and Control Panel area.
• Keep the Safety Lock Pin and Safety Lever area clean to avoid foreign particles accumulating in the area.
The Safety Lock mechanism has been designed to prevent the appliance from switching on when the appliance is
not properly in place.
Safety Lock Pin
Motor
Housing
Cord Plug*Control
Panel
1500
1000
500
One scale
approx. 0.25 L
Blender
Blender
Lid
Scraper
Inner
Lid
Blender
Gasket
Blender
Cutting Blade
Blender
Jug Base
Blender
Jug (Glass)
Working
Capacity:
1.5 L
Safety Lever
* The shape of the Plug may vary according to regions or countries.
Control Panel
* Use this function for intermittent operation until the required blending texture is obtained.
P1 P22
1
ICE CRUSH
Off Speed 1 Speed 2 Pulse 1*
(Low speed
pulse)
Pulse 2*
(High speed
pulse)
Dry Mill
Mill Container
Mill Gasket
Mill Cutting Blade
Mill Container Base
Lower Connector
Blender_MX-KM5080.indb 5Blender_MX-KM5080.indb 5 5/20/2020 3:47:13 PM5/20/2020 3:47:13 PM