English
4
switch off by pressing the “0”
button. Unplug.
Turn the mill
container
anticlockwise to
remove it, open
the mill container,
and take out the
ingredients.
1
Turn the mill container upside down and place the
ingredients in it. Twist the mill container base clockwise until
you hear a click sound.
2
Attach blender jug to the motor housing
.
1
Place the ingredients into blender jug, and then close the lid.
hear a click sound.
3
Plug in. Hold the lid, and then turn
on the appliance by pressing the
required speed.
on the motor
on the mill
until you hear a click sound.
2
Attach the mill container to the motor housing.
3
Plug in. Hold the mill container, and then
turn on the appliance by pressing the
required speed.
4
switch off
by pressing the “0” button. Unplug.
Turn the blender jug anticlockwise to
remove it, open the lid
and take out the
ingredients.
Containers and Other Parts Blades Motor Housing
Wash the parts using a soft sponge soaked in diluted kitchen
detergent (neutral). Rinse and dry thoroughly.
(
Wipe motor housing with a
damp cloth.
Cleaning and Care
How to use the scraper
Scraper is useful when
Carefully clean blades with a
brush under running water.
(
Blender Jug Prewash Storing
Unlock
1
2
1
2
3
4
1
2
4
3
2
1
Unlock
1
2
3
1
2
3
3
To Next Page
Loading...
