26 - Washing Instructions
Optional Functions
Krótkie pranie (Time Saver)
function
Note
Krótkie pranie (Time Saver)
function cannot be used with certain
programmes. (See pages 22-23.)
If you select it when it is unavailable,
an error alarm will sound.
Press the Krótkie pranie (Time Saver)
button
to select the function.
The button will flash.
Function
Description
Krótkie
pranie
(Time
Saver)
Washing times will be shorter
than those of the basic
programmes, suitable for
lightly soiled laundry.
Blokada przed dziećmi
(Child lock)
When the child lock is activated, the
controls are locked. This prevents children
from changing the wash settings or playing
with the appliance.
Activating/deactivating child lock
Switch on the appliance.1.
Press and hold the Krótkie pranie 2.
(Time Saver) button for at least 5
seconds.
The
symbol is displayed to show
that the child lock is activated.
To deactivate, hold down the Krótkie 3.
pranie (Time Saver) button again
for 5 seconds (please ignore three
beeps heard, keep Krótkie pranie
(Time Saver) button pressed until it
deactivates).
Preset timer
You can use the timer to preset the wash to
start anywhere from 1 to 24 hours later.
Note
Do NOT use detergent which does not
dissolve thoroughly with the preset
function, because the detergent might
cake up before the wash starts and not
flow out.
Setting a preset time
Set a preset time after you have selected
the programmed and optional functions
(see page 18).
Continuously press the Czas (Time) 1.
button until the desired preset time is
displayed.
Press the Temperature button or the 2.
Krótkie pranie (Time Saver) button to
set the preset time.
The countdown has not started.
To cancel the preset time -
Press the Czas (Time) button.
To change the preset time -
Press the Czas (Time) button, then
redo the setting from step 1.
Press the Start/Pauza (Start/Pause) 3.
button to activate the countdown.
To cancel the preset time -
Turn the programme selection dial
to ‘Wył. (Off)’. (All settings will be
cancelled.)
To change the preset time -
Turn the programme selection dial
to ‘Wył. (Off)’. After reselecting the
programme and optional functions,
redo the setting from step 1.
To Next Page
Loading...
