Panasonic NA-126MB1WSA

39 39 39
9 UNPACKING WAYS OF MAIN PARTS
9. Undo the drain pump
I.Pull out the terminal
behind the drain pump.
II.Nip out clamp between
drain hose and the drain
pump, and then pull out
the drain hose.
III.Loosen
the screws fitted
on the drain pump, and
then pull out the drain
pump.
10
.Undo the pulley and
motor
Undo
the pulley
Rotate the pulley and at
the same time pull out the
belt.
Undo the motor
I.Let the machine lie
down on the back and
then pull out the motor
wire and grounding wire.
II.Use spanner to remove
the motor screw, and lift
up the motor with the
other hand in case of
falling to the drain pump