To Next PageTo Next PageWhy does powdered detergent residue remain after washing in my Panasonic NA-140VG3 Washer?
If powdered detergent residue remains after washing in your Panasonic Washer, ensure you are putting the detergent in the detergent drawer, not directly into the drum.
What to do if my Panasonic NA-140VG3 Washer is unable to drain?
If your Panasonic Washer is unable to drain, check the drain hose for clogs, immersion in water, extension beyond 3 meters, or freezing. Clean the drain filter if it's clogged.
Why is there no foam or hardly any foam in my Panasonic Washer?
The lack of foam in your Panasonic Washer could be due to several reasons: the temperature, level, and softness of the water affect foam levels. Ensure you are using enough detergent and not a reduced-foam type. Heavily soiled or large loads can also reduce foam. Make sure you put the powdered detergent in the detergent drawer.
Why is there an unusual noise or vibration in my Panasonic NA-140VG3 Washer?
An unusual noise or vibration in your Panasonic Washer may be due to metal items in the drum, or because the appliance is on a sloping or unstable surface. Also, check to ensure that the anchor bolts have been removed.
Why does water drain out during the washing in my Panasonic Washer?
If water drains out during the washing cycle of your Panasonic Washer, this is normal; the water frequently drains out and builds up in order to wash away excess foam. This feature is called foam detection.
Why does water build up during the washing in my Panasonic Washer?
If water builds up during the washing cycle of your Panasonic Washer, this is normal; water is automatically supplied if the amount of water has decreased. For heavy loads, the water may fill up repeatedly.
How to get rid of unusual odour from Panasonic NA-140VG3?
If your Panasonic Washer has an unusual odour, rubber parts may give off a smell when you start using the appliance, but the smell will go away over time. You can also wash the drum by running the 90 °C programme.
What to do if my Panasonic NA-140VG3 Washer is unable to supply water?
If your Panasonic Washer is unable to supply water, check if the tap is closed, the water pipe or hose is frozen, the water supply has been disrupted, or the water-supply filter is clogged. After correcting the problem, open and close the door, and restart the wash. Replace the hose if the red mark appears.
What to do if my Panasonic NA-140VG3 is unable to spin-dry?
If your Panasonic Washer is unable to spin-dry, try the following: 1. Untangle clumps of clothing if the laundry is too heavy. 2. Reduce the load if items like blankets are too large. 3. Add one or two bath towels if the laundry is too light. 4. Change the setting location if the appliance is on an unstable or uneven surface.
Why is no water going into my Panasonic Washer?
If your Panasonic Washer isn't getting water, the water tap might be turned off. The water-supply hose may be frozen, or the water supply may be disrupted. Also, the water-supply filter may be clogged.
General| Water consumption per cycle | 63 L |
|---|---|
| Energy consumption washing per cycle | 0.95 kWh |
| Display type | LED |
| Loading type | Front-load |
| Product color | Grey, White |
| Appliance placement | Freestanding |
| Washing class | A |
| Annual water consumption washing | 12400 L |
| Annual energy consumption washing | 200 kWh |
| Drum capacity | 10 kg |
| AquaStop function | Yes |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 71 dB |
| Noise level (wash) | 53 dB |
| Number of washing programs | 16 |
Weight and Dimensions| Depth | 625 mm |
|---|---|
| Width | 596 mm |
| Height | 845 mm |
| Weight | 74000 g |
Crucial warnings and guidelines to prevent death or serious injury.
Explanation of the control panel buttons and their functions for operation.
Overview of available washing programmes and their load capacities.
Common problems with their causes and solutions for the washing machine.
Explains various error codes and the actions to take for each.
Guidelines for selecting a suitable and safe location for the appliance.
Instructions for connecting water supply and drain hoses, and power.
How to perform an initial test run to check for leaks and function.
