What happens if electricity cuts out during Panasonic Washer cycle?
If the electricity supply cuts out while your Panasonic Washer is on, the appliance stops and will not start by itself when the power comes back on. You have to select a programme and start it again.
What to do if the Panasonic NA - 140VX3 door does not open?
If the Panasonic Washer door won't open, it could be due to the door lock being activated, the child safety lock being engaged, or the water temperature or level being too high.
What does U11 error mean on Panasonic Washer?
If your Panasonic Washer displays error code U11, meaning it's unable to drain, check the drain hose for clogs, immersion in water, extension beyond 3 meters, or freezing. Also, clean the drain filter if it's clogged. After correcting the problem, open and close the door, and then start the wash again.
Why don't the buttons work on my Panasonic NA - 140VX3 Washer?
If the buttons on your Panasonic Washer do not work, it may be because the programme, temperature, or process settings cannot be changed while washing is in progress (only the rinse or spin settings can be changed). The child safety lock may also be activated.
What to do if Panasonic Washer says door is open?
If your Panasonic Washer door is open, make sure that the door is shut properly.
Why does my Panasonic Washer have foam after rinse?
Although some foam and water might remain depending upon the state of the laundry and the amount of detergent used, the performance of the rinse cycle is unaffected.
Why do foam and water remain in door of Panasonic Washer?
If foam and water remain in the door or door seal of your Panasonic Washer, although some foam and water might remain depending upon the state of the laundry and the amount of detergent used, the performance of the rinse cycle is unaffected.
Why is my Panasonic NA - 140VX3 Washer making noise when draining?
If there is noise when the water drains out of your Panasonic Washer, this is normal; it is noise created by the operation of the drain pump.
Why is there detergent residue in my Panasonic NA - 140VX3 Washer after washing?
If after the wash has finished, powdered detergent residue remains in your Panasonic Washer, you may have put powdered detergent directly into the drum; you must put it in the detergent drawer.
Why is fabric softener overflowing in my Panasonic NA - 140VX3?
If fabric softener overflows in your Panasonic Washer, the softener may have exceeded the MAX level for the detergent drawer, or you may have spilt the liquid by closing the detergent drawer too strongly.
Covers safety for users, electrical connections, cables, and handling precautions.
Precautions for appliance installation, operation, door handling, and drum contents.
Identification of common washing machine problems and their potential causes.
Explanation of error codes displayed and guidance on resolving them.
Procedure for removing transport anchor bolts and levelling the appliance.
Instructions for correctly connecting water supply, drain hoses, and power.
General| Water consumption per cycle | 63 L |
|---|---|
| Energy consumption washing per cycle | - kWh |
| Dimensions (WxDxH) | 596 x 594 x 845 mm |
| Power requirements | 220-240 V, 50 Hz |
| Annual water consumption washing | 12400 L |
| Annual energy consumption washing | 200 kWh |
| Door color | Chrome |
| Door hinge | Left |
| Drum volume | 70 L |
| Display type | LCD |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Drum capacity | 10 kg |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Minimum spin speed | 500 RPM |
| Noise level (spin) | 71 dB |
| Noise level (wash) | 53 dB |
| Number of washing programs | 16 |
Weight and Dimensions| Depth | 594 mm |
|---|---|
| Width | 596 mm |
| Height | 845 mm |
| Weight | 74000 g |
| Door opening diameter | 340 mm |
To Next Page