To Next PageTo Next PageWhy is there detergent residue in my Panasonic NA - 140VX3 Washer after washing?
If after the wash has finished, powdered detergent residue remains in your Panasonic Washer, you may have put powdered detergent directly into the drum; you must put it in the detergent drawer.
What happens if electricity cuts out during Panasonic Washer cycle?
If the electricity supply cuts out while your Panasonic Washer is on, the appliance stops and will not start by itself when the power comes back on. You have to select a programme and start it again.
Why is fabric softener overflowing in my Panasonic NA - 140VX3?
If fabric softener overflows in your Panasonic Washer, the softener may have exceeded the MAX level for the detergent drawer, or you may have spilt the liquid by closing the detergent drawer too strongly.
What to do if water supply to Panasonic NA - 140VX3 is disrupted?
When the water is supplied again to your Panasonic Washer after a disruption, it may be impure at first, so you have to disconnect the water-supply hose and drain away the impure water through the tap. Make sure that the water-supply hose has been reconnected before using the appliance.
Why is the fan in my Panasonic NA - 140VX3 Washer making noise?
If the fan makes noise in your Panasonic Washer, this is normal; the fan is cooling off the electric parts.
Why does my Panasonic Washer have foam after rinse?
Although some foam and water might remain depending upon the state of the laundry and the amount of detergent used, the performance of the rinse cycle is unaffected.
Why does the remaining time change on my Panasonic Washer?
If the displayed remaining time on your Panasonic Washer changes, it's normal. The remaining time is estimated and corrected continually. The remaining time also increases if extra rinsing and spinning are required to correct an unbalanced load caused by laundry shifting.
What does U14 mean on Panasonic NA - 140VX3?
If your Panasonic Washer displays error code U14, it means it's unable to supply water. Check if the tap is closed, the water pipe or hose is frozen, the water supply has been disrupted, or the water-supply filter is clogged. After correcting the problem, open and close the door, then restart the wash. Also, if the red mark appears in the hose with water-supply valve, it have been stop the water supply, so you should replace with a new hose.
Why don't the buttons work on my Panasonic NA - 140VX3 Washer?
If the buttons on your Panasonic Washer do not work, it may be because the programme, temperature, or process settings cannot be changed while washing is in progress (only the rinse or spin settings can be changed). The child safety lock may also be activated.
What does U11 error mean on Panasonic Washer?
If your Panasonic Washer displays error code U11, meaning it's unable to drain, check the drain hose for clogs, immersion in water, extension beyond 3 meters, or freezing. Also, clean the drain filter if it's clogged. After correcting the problem, open and close the door, and then start the wash again.
General| Water consumption per cycle | 63 L |
|---|---|
| Energy consumption washing per cycle | - kWh |
| Dimensions (WxDxH) | 596 x 594 x 845 mm |
| Power requirements | 220-240 V, 50 Hz |
| Annual water consumption washing | 12400 L |
| Annual energy consumption washing | 200 kWh |
| Door color | Chrome |
| Door hinge | Left |
| Drum volume | 70 L |
| Display type | LCD |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Drum capacity | 10 kg |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Minimum spin speed | 500 RPM |
| Noise level (spin) | 71 dB |
| Noise level (wash) | 53 dB |
| Number of washing programs | 16 |
Weight and Dimensions| Depth | 594 mm |
|---|---|
| Width | 596 mm |
| Height | 845 mm |
| Weight | 74000 g |
| Door opening diameter | 340 mm |
Covers safety for users, electrical connections, cables, and handling precautions.
Precautions for appliance installation, operation, door handling, and drum contents.
Identification of common washing machine problems and their potential causes.
Explanation of error codes displayed and guidance on resolving them.
Procedure for removing transport anchor bolts and levelling the appliance.
Instructions for correctly connecting water supply, drain hoses, and power.
