Why do the buttons on my Panasonic Washer not work?
If the buttons on your Panasonic Washer aren't working, it could be because the programme, temperature, and process settings cannot be changed while washing is in progress (the rinse or spin settings can be changed). The child safety lock may also be activated.
What to do if the door is open on my Panasonic NA-140VG3 Washer?
Make sure that the door of your Panasonic Washer is shut properly.
Why is no water going into my Panasonic Washer?
If your Panasonic Washer isn't getting water, the water tap might be turned off. The water-supply hose may be frozen, or the water supply may be disrupted. Also, the water-supply filter may be clogged.
What to do if my Panasonic NA-140VG3 is unable to spin-dry?
If your Panasonic Washer is unable to spin-dry, try the following: 1. Untangle clumps of clothing if the laundry is too heavy. 2. Reduce the load if items like blankets are too large. 3. Add one or two bath towels if the laundry is too light. 4. Change the setting location if the appliance is on an unstable or uneven surface.
What to do if my Panasonic NA-140VG3 Washer is unable to supply water?
If your Panasonic Washer is unable to supply water, check if the tap is closed, the water pipe or hose is frozen, the water supply has been disrupted, or the water-supply filter is clogged. After correcting the problem, open and close the door, and restart the wash. Replace the hose if the red mark appears.
Why does the fan make noise in my Panasonic Washer?
The fan noise in your Panasonic Washer is normal; the fan is cooling off the electric parts.
Why is the display not clear on my Panasonic Washer?
If the display on your Panasonic Washer isn't clear, it might be because the appliance is in a brightly lit or sunlit area.
Why is there noise when the water drains out of my Panasonic Washer?
The noise when water drains out of your Panasonic Washer is normal; it's created by the operation of the drain pump.
Why does powdered detergent residue remain after washing in my Panasonic NA-140VG3 Washer?
If powdered detergent residue remains after washing in your Panasonic Washer, ensure you are putting the detergent in the detergent drawer, not directly into the drum.
Why is there no foam or hardly any foam in my Panasonic Washer?
The lack of foam in your Panasonic Washer could be due to several reasons: the temperature, level, and softness of the water affect foam levels. Ensure you are using enough detergent and not a reduced-foam type. Heavily soiled or large loads can also reduce foam. Make sure you put the powdered detergent in the detergent drawer.
Crucial warnings and guidelines to prevent death or serious injury.
Explanation of the control panel buttons and their functions for operation.
Overview of available washing programmes and their load capacities.
Common problems with their causes and solutions for the washing machine.
Explains various error codes and the actions to take for each.
Guidelines for selecting a suitable and safe location for the appliance.
Instructions for connecting water supply and drain hoses, and power.
How to perform an initial test run to check for leaks and function.
General| Water consumption per cycle | 63 L |
|---|---|
| Energy consumption washing per cycle | 0.95 kWh |
| Display type | LED |
| Loading type | Front-load |
| Product color | Grey, White |
| Appliance placement | Freestanding |
| Washing class | A |
| Annual water consumption washing | 12400 L |
| Annual energy consumption washing | 200 kWh |
| Drum capacity | 10 kg |
| AquaStop function | Yes |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 71 dB |
| Noise level (wash) | 53 dB |
| Number of washing programs | 16 |
Weight and Dimensions| Depth | 625 mm |
|---|---|
| Width | 596 mm |
| Height | 845 mm |
| Weight | 74000 g |
To Next Page