Why do the buttons not work on my Panasonic Washer?
If the buttons on your Panasonic Washer do not work, it may be because the program, temperature, and process settings cannot be changed while washing is in progress (the rinse or spin settings can be changed). Also, the child safety lock may be activated.
What to do if the Panasonic NA-140VG4 Washer door does not open?
If the door of your Panasonic Washer won't open, the door lock or the child safety lock may be activated. Also, the water temperature or level may be too high.
Why does water drain out during washing in my Panasonic Washer?
It's normal for water to drain and build up during washing. This is because the Panasonic Washer has a foam detection feature that washes away excess foam.
How to get rid of unusual odour from Panasonic NA-140VG4 Washer?
If your Panasonic Washer has an unusual odour, rubber parts may give off a smell when you start using the appliance, but the smell will go away over time. You can also wash the drum by running the 90 °C programme.
How to get rid of the unusual odor from my new Panasonic NA-140VG4 Washer?
When you start using the Panasonic Washer, rubber parts may give off a smell, but the smell will go away over time. You can wash the drum by running the 90 °C program.
Why do foam and water remain in the door or door seal of my Panasonic NA-140VG4?
Although some foam and water may remain depending upon the state of the laundry and the amount of detergent used, rinse performance is unaffected.
Why does the drum stop and rotate several times during spin-dry in my Panasonic NA-140VG4?
This is normal; the appliance has detected an unbalanced load and is trying to correct it.
Why is there noise when the water drains out of my Panasonic NA-140VG4 Washer?
This is normal; it is noise generated by the operation of the drain pump.
Why does water build up during washing in my Panasonic NA-140VG4 Washer?
It's normal for water to build up during the washing process. If the amount of water has decreased, the Panasonic Washer will automatically supply more. For heavy loads, this may happen repeatedly.
Why does no water flow into the appliance during the rinse process of my Panasonic NA-140VG4?
Before rinsing, the appliance spins to drain out remaining water. The water will fill up after that.
General| Power consumption (off) | 0.2 W |
|---|---|
| Water consumption per cycle | - L |
| Energy consumption washing per cycle | 0.89 kWh |
| Washing class | A |
| Annual water consumption washing | 12400 L |
| Annual energy consumption washing | 167 kWh |
| Door color | Black |
| Door hinge | Left |
| Water fill | Cold |
| Drum volume | 70 L |
| Control type | Buttons, Rotary |
| Display type | LED |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Door opening angle | 150 ° |
| Appliance placement | Freestanding |
| Drum capacity | 10 kg |
| Cycle time (max) | 225 min |
| Delay start (max) | 24 h |
| Residual moisture | 30 % |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Minimum spin speed | 500 RPM |
| Noise level (spin) | 71 dB |
| Noise level (wash) | 53 dB |
| Number of washing programs | 8 |
Weight and Dimensions| Depth | 625 mm |
|---|---|
| Width | 596 mm |
| Height | 845 mm |
| Weight | 74000 g |
Service information is for experienced technicians only and warns of potential dangers.
Highlights safety-critical parts and warns against design modification.
Details laundry capacity and control panel for the NA-140VG4 model.
Details laundry capacity and control panel for NA-168VG4/NA-148VG4 models.
Explanation of each button's function on the washing machine control panel.
Instructions for locking and unlocking the door, including safety precautions.
To Next Page
