To Next Page
M
michaelalvaradoSep 12, 2025
Why does the drum stop and rotate several times during spin-dry in my Panasonic NA-140VG4?
- WWilliam BanksSep 12, 2025
This is normal; the appliance has detected an unbalanced load and is trying to correct it.
Why does the drum stop and rotate several times during spin-dry in my Panasonic NA-140VG4?
This is normal; the appliance has detected an unbalanced load and is trying to correct it.
Why does water build up during the wash process in my Panasonic NA-140VG4 Washer?
This is normal; water is automatically supplied if the amount of water has decreased. For heavy loads, the water may fill up repeatedly.
Why does powdered detergent residue remain after the wash has finished in my Panasonic NA-140VG4 Washer?
You may have put powdered detergent directly into the drum; you must put it in the detergent drawer.
Why does the displayed remaining time change on my Panasonic Washer?
The remaining time is estimated and corrected continually. The remaining time increases if extra rinsing and spinning are required to correct an unbalanced load, which is caused by the laundry shifting to one side of the drum.
Why is no water going into my Panasonic Washer?
If your Panasonic Washer isn't getting water, the water tap might be turned off. The water-supply hose may be frozen, or the water supply may be disrupted. Also, the water-supply filter may be clogged.
Why do the buttons on my Panasonic NA-140VG4 Washer not work?
If the buttons on your Panasonic Washer aren't working, it could be because the programme, temperature, and process settings cannot be changed while washing is in progress (the rinse or spin settings can be changed). The child safety lock may also be activated.
Why does water build up during washing in my Panasonic NA-140VG4 Washer?
It's normal for water to build up during the washing process. If the amount of water has decreased, the Panasonic Washer will automatically supply more. For heavy loads, this may happen repeatedly.
Why does the spin process repeatedly start and stop in my Panasonic Washer?
This is normal; intermittent spinning of the tub helps the spin process to operate quietly. The laundry may be too light. If so, add one or two bath towels.
Why does no water flow into the appliance during the rinse process of my Panasonic NA-140VG4?
Before rinsing, the appliance spins to drain out remaining water. The water will fill up after that.
What to check if my Panasonic Washer is unable to supply water?
Check if the tap is closed, the water pipe or hose is frozen, the water supply has been disrupted, or the water supply filter is clogged. After correcting the problem, open and close the door, and then start the wash again. If the red mark appears in the hose with a water supply valve, the water supply has stopped and you should replace it with a new hose.
General| Power consumption (off) | 0.2 W |
|---|---|
| Water consumption per cycle | - L |
| Energy consumption washing per cycle | 0.89 kWh |
| Washing class | A |
| Annual water consumption washing | 12400 L |
| Annual energy consumption washing | 167 kWh |
| Door color | Black |
| Door hinge | Left |
| Water fill | Cold |
| Drum volume | 70 L |
| Control type | Buttons, Rotary |
| Display type | LED |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Door opening angle | 150 ° |
| Appliance placement | Freestanding |
| Drum capacity | 10 kg |
| Cycle time (max) | 225 min |
| Delay start (max) | 24 h |
| Residual moisture | 30 % |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Minimum spin speed | 500 RPM |
| Noise level (spin) | 71 dB |
| Noise level (wash) | 53 dB |
| Number of washing programs | 8 |
Weight and Dimensions| Depth | 625 mm |
|---|---|
| Width | 596 mm |
| Height | 845 mm |
| Weight | 74000 g |
Service information is for experienced technicians only and warns of potential dangers.
Highlights safety-critical parts and warns against design modification.
Details laundry capacity and control panel for the NA-140VG4 model.
Details laundry capacity and control panel for NA-168VG4/NA-148VG4 models.
Explanation of each button's function on the washing machine control panel.
Instructions for locking and unlocking the door, including safety precautions.
