Panasonic NA-147VB2

2-6 Smart Beat Wash by variable rotation control
Previous washing method
New washing method (Variable rotation control)
The drum rotates at a constant speed. Therefore, due to different fabrics and weights of clothing
and insufficient penetration of water, dirt can not be beaten out by washing.
,
The laundry s movement inside the drum shall
be detected by 3D sensor, and the drum rotates
most suitable speed to realize proper beat washing.
Heavily clothes
Heavily clothes
Lightly clothes
Lightly clothes
If clothes shall not be
penetrated water enough
If clothes shall not be
penetrated water enough
45 r/min 45 r/min 45 r/min
Increased rotation
speed of the drum
Decreased rotation
speed of the drum
Decreased rotation
speed of the drum
3D Sensor
How to check the 3D sensor
Operate "Test-No water"
C-process: Spin Operation
Operate approx. 2 minutes with no load
(it shall be rotated smoothly)
1)Press / temp. switch =X-axis
2)Press r/min (spin) switch =Y-axis
3)Time (Reserve) switch =z-axis
If indicate below 30 (Actual
moving 3mm)
If indicate more than 30
Incase there is no data and signal coming from the
3D sensor to the main PC Board within 30 seconds
H41 shall be appeared.
Replace the 3D sensor
-6-
NA-168VX2/168VG2/148VA2/128VA2/147VB2