ProcedureFigure
3.Remove the hose clamp from the outer tub, and
remove the feed hose A.
4.Remove the nineteen bolts mounting the outer
tub cover by a box wrench (size 10mm).
5.Pull out the outer tub cover to remove.
After remove the outer tub cover
1.Remove the cap by using minus-type screwdriver.
2.Remove a screw mounting the drum cover.
3.Remove the drum cover.
4.Remove the six bolts mounting the drum unit by
the box wrench (size 13mm).
4.Pull out the drum unit to remove.
-33-
17 Replacement
of the drum unit
NA-16VX1/16VG1/14VA1
Description
To Next Page
Loading...
