Maintenance
11
Water supply lter
If water does not ow smoothly
● Follow the procedure below to prevent
splashing of water.
1
After turning off the water faucet
Turn the
power on.
2
Start.
3
After approx. 40
seconds
Turn the power off.
4
Loosen the nut
and remove the
hose.
5
Remove the lter and remove
dirt on the lter.
Water supply lter
6
Reattach the lter to its
original position.
Tub
Once a week <Air Dry>
1
After operation ends
Run the Air Dry program without
loading laundry. (P. 9)
Once a month <Tub Hygiene>
Preparation: Turn on the water faucet.
1
Without loading laundry
Turn the power on.
2
Select the Tub
Hygiene program.
3
Start.
When the tub is lled with water
Pause.
4
Put bleach in the tub.
● Use whiten bleach
(chlorine bleach).
Approx. 200
ml
5
After closing the lid
Start.
After approx. 2
hours
and a half, tub cleaning
ends.
To Next Page
Loading...
