Panasonic NA-F65B5 - Water Tap and Power Connections; Leveling and Trial Operation

5. Connect the power plug and grounding wire.
7. Perform a trial operation.
6. Check the horizontal state.
4. Connect the water tap adaptor and water supply hose.
●
Check if there is no water leakage, abnormal sound or error messages.
1313
When Necessary
●
Ask a service person for grounding work.
■
Adjusting height with the adjustable leg knob.
1) Turn the adjustable leg knob to the left side and loosen
as indicated with the left pointing arrow. Then, turn the
adjustable leg to adjust the levelness.
2) Turn the adjustable leg knob to the right side and
tighten securely as indicated with the right pointing
arrow.
Adjustable leg
knob
Tighten
Loosen
Adjustable leg
To raise
To lower
1
Connect the water tap adaptor
to the faucet.
1) Turn
A
part to the left until approx.
4 mm of the thread becomes visible.
2) Loosen 4 screws.
3) Connect to the faucet and tighten the
screws.
2
Fix.
●
Turn
A
part to the right side and
tighten securely.
(To prevent water leak)
3
Connect the water supply hose
to the water tap adaptor.
●
Pushing down the lever, insert and hook
the claw of the lever on the fl ange of the
adaptor.
4
Connect the water supply hose
to the water supply valve screw.
●
Slightly lift up the elbow and tighten the
nut.
●
Check if the elbow is not loose.
Elbow
Water supply
valve screw
Nut
A
part
Screw
thread
Lever
CAUTION
●
Tighten the nut fi rmly.
(To prevent water leak)
●
Do not forcibly bend the water
supply hose.
(To prevent water leak caused by
the bent hose)
Lever
Claw
Flange
NA-F706562B5F62B3India.indd13NA-F706562B5F62B3India.indd13 2015/02/1014:54:002015/02/1014:54:00