3.1. Timer type drying function
Below half the height of the stainless steel part of the tub
represents a load of under 3.0kg.
The heater, fan motor and fan case are providing inside of the
panel, and drying function shall be operated by timer control.
Exhaust air including humid air shall be come out from upper
portion of the tub through the exhaust filter.
<Approximate drying time>
Drying capacity Necessary hours
1. 3.0kg Approx. 3 hours
2. 2.0kg Approx. 2-3 hours
3. 1.0kg Approx. 1.5-2 hours
4. 0.5kg Approx. 1-1.5 hours
*Dryed up conditions shall be changed against
atmospheric temperature, humidity and installations.
3 PRODUCT INFORMATION
Dryer capacity 3.0kg
Putting in too many garments will lessen the dryer’s effect and cause wrinkles.
Overfilling (over capacity) indicator
Remaining time indication for drying
It is not possible to indicate remaining time more than 100 min. due to
two digit. therefore, even select more than 2 hours (2 and 3 hours),
“--”mark shall be indicated at start of drying and indicate proper
remaining time from 90 min.
Remaining time shall be decreased on every one minute.
Drying process (Power save course)
3
To Next Page
Loading...
